• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like timber and aluminum.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. However when you have double-pane windows that are anchored by internal beading it will be more difficult to remove the existing panes and install new ones. In this case you'll need to locate some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you're planning to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. It also acts as an obstacle to stop criminals from getting into your home. If the distance between the door and the window is large, you might need to consider a security screen that also has a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. In time, they could develop a number of problems that include sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window to get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for an appropriate fit. If you are happy with the fit of the window repair near me, tighten the screws to secure them in the right position.

If you are unable to move the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and Upvc window Repair draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking may have to be removed. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to note that if the leak originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze, it may be hinges that are at the fault. They can be repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

It is also important to ensure that the Upvc Window repair hinges are opening and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a particular way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also due to wear and tear could become misaligned. This can cause a gap to form where the sash joins the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it's possible to give them a good clean, but in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals. These can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be placed on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a life span and they may reach an point at which it is more efficient to replace them than fix them. So, if you're having issues with your upvc windows, it is best to seek professional assistance immediately.